Today we are releasing Venus OS v3.33. Changes:
Generator management
-
Improvements to the "generator auto-start is off" alarm. That alarm is there to prevent accidental system outages by warning when the auto-start functionality has been forgotten to be re-enabled. And for a digitally connecte…
Today we are releasing Venus OS v3.32. Changes:
General
- Fix notifications not being shown as acknowledged in the user interface.
- RV-C protocol: Fix bug that causes crashes and restarts + RV-C Out Tank feature.
- VRM and VictronConnect connectivity (MQTT): Fix connection to cloud serv…
Release notes for VE.Bus firmware version v510:
- Added gridcodes: Czech, Poland
- Split the combined G98/G99 gridcode in two separate gridcodes. With G98 being limited to 16A.
- Enabled the appendix M. gridcodes of AS/NZS4777 for standard Multis/Quattros (installation requires external Island …
How to install:
This firmware update is available now as a man…
Solar Charge Controller firmware v1.64 contains a few model specific changes:
- SmartSolar 75/10 and 75/15: fix stability issue that could cause it to freeze during shutdown and startup, only continuing after a power cycle. Applies only to HQ2235 and later.
- SmartSolar 100/20: fix stability issue …
- Improved Error 11 detection reliability on Quattro-II models, especially in areas with frequent load-shedding and/or other grid failures.
- Various internal changes in the code, which is why its renum…
Good afternoon,
Just now released, Venus OS v3.31, brings various stability improvements as well as an update of Signal K Server:
- Fix a bug that can cause the onscreen UI to show a green square as well as Remote Console locking up. This issue was introduced in v3.30.
- Fix EVCS …
Released today, Venus OS v3.30 adds various highlights:
- Peakshaving for Victron ESS systems featuring an Energy Meter
- Improvements to our new Marine MFD App, including much faster loading
- Various other fixes and improvements.
For further details, see the Venus OS v3.30 blogpost.
Good day!
Today we are releasing VictronConnect App v6.00. The main highlight is the new settings lock:
The new setting lock feature allows installers, and OEMs like RV and boat builders, to lock critical settings to prevent accidental changes being made to a system's operating parameters. A…
Good day!
Today we released Venus OS v3.22. It contains stability improvements that affect a few specific system types and situations:
- Fix MQTT issue that caused time-outs and/or internal MQTT service restart in systems where the GX was receiving many MQTT writes. This affects systems with cust…
Today we've released an update of our VictronConnect App, v5.105. Last week there was also a new version, here are the highlights of both combined:
- A new firmware release for the Orion XS, which adds VE.Smart Networking.
- The Orion XS has been added to the demo product library.
- Added …
Good day!
Today we released Venus OS v3.21. It contains just one change:
- Fix MQTT issue that prevented writing negative numbers over the MQTT protocol. This bug affected systems with customer-own software, for example special control loops that run a different ESS algorithm than the standard Vi…