Today we've released an update of our VictronConnect App, v5.105. Last week there was also a new version, here are the highlights of both combined:
- A new firmware release for the Orion XS, which adds VE.Smart Networking.
- The Orion XS has been added to the demo …
Good day!
Today we released Venus OS v3.21. It contains just one change:
- Fix MQTT issue that prevented writing negative numbers over the MQTT protocol. This bug affected systems with customer-own software, for example special control loops that run a different ESS algorithm than the standard Vi…
Good morning!
Today we are releasing Venus OS v3.20. The two highlights are:
- Add support for our new Orion XS 12/12 50A DC-DC Battery Charger.
- Completely renewed Marine HTML5 App. Readability is increased, look and feel is much improved, and lastly tank level readout has …
Today we released Venus OS v3.14.
Two highlights with regards to tank monitoring and alternator regulators:
- Add support for all new Mopeka tank sensor models: Universal Pro, TD40, Pro 200 and Pro+.
- Add support for the ARCO Zeus High Energy Alternator regulator. Includes …
Released today, RS firmware series v1.16 improves the partial shading performance of the MPPTs.
The previous method of shade detection has been replaced with a fast periodic sweep which scans for a short five second scan every 5 minutes.
Extensive field testing has shown significant improvements.
…Today we've released a new version of the VictronConnect App, v5.103.
General changes:
- Update the "where to find the pin code" message shown to the user while connecting via Bluetooth. It now includes instructions to look for the Bluetooth pin code on a label …
Today we've released a new version of the VictronConnect App, v5.102. It includes:
- Add firmware v509 for the Quattro-II models (2651 and 2645). This version fixes a problem with earlier revisions, 504 up to and including 508, that a Quattro-II system could end up in a situation …
We've recently released two VE.Bus firmware versions v507 & v508. Here are the changes:
v507
- Fix noisy/erroneous fan driving for:
- MultiPlus-II 24/3000/70-32 (PMP242305010); HQ2229 Up to and including HQ2337
- MultiPlus-II 48/3000/35-32 (PMP482305010); HQ2226 Up to and including HQ2339
- Mult…
Today we released Venus OS v3.13. It has various stability improvements:
Generator integration
- ComAp: fix Runtime hours display which was off by a factor of 60. Thanks to Srdjan Savic.
- DSE: fix engine speed reporting
- DSE: fix 7xxx MKII support
Aside from these …
The new firmware v1.27 with many new features has been released for the EVCS and EVCS NS:
New features:
- Overload protection reads an 'Overload' state from the inverter and reacts by reducing the current to minimum or stop charging. The overload warning remains visible until the car …