Today we released Venus OS v3.10. Highlights:
- Add controls for our new Solar and Wind priority feature.
- Add Generator service interval
- Add integration with ComAp Generator Controllers, reading AC data, but also oil pressure, coolant temperature as well as further status and data readings inclu…
You can now select the following time ranges on the dashboard to see the forecasted solar production for that range:
- Tomorrow
- Day after tomorrow
- Next 2 days
- Next 7 days
Custom time ranges can now also be selected up to 7 days in the future, as well as the past, …
The Multi RS Declaration of Conformity and Certificates of Safety have just been released and are now available in the the download section of the Multi RS Product page.
Direct download links here:
Declaration of Conformity – Multi RS Solar 48/6000/100-450/100
Today we released VE.Bus firmware version v506, together with new versions of VEConfigure, VE.Bus System configurator and VE.Bus Quick Configure.
Change log:
- Add the new Solar & wind priortiy feature. See https://ve3.nl/vebus-pr for further information.
- Bug removed from GridCo…
The MPPT RS 450/100, batches HQ2216 up to and including HQ2236, show an excessive failure rate. The underlying cause was a temporary change in a component. Despite extensive bench testing when approving the change, field returns have shown that these batches do not meet our normal reliability stand…
Today we released a firmware update for the Multi RS that adds the option to configure three phase systems. (!). A major next step towards making the RS a full featured Victron inverter/charger.
Note that paralleling multiple units on one phase is not possible. Hence, maximum system size with…
Today we released Venus OS v3.01. It has various stability improvements:
- Fix issue in CAN-Bus timing for Ekranos
- Fix bug where a network issue could cause the real time connection to VRM (MQTT) to be lost, until rebooted.
- Fix Modbus-TCP bug, causing VE.Bus Inverter/state, register 31, to show …
A new firmware v1.26 with many new features has been released for the EVCS and EVCS NS:
- Added ‚Overload protection’ feature. If the new "Maximum inverter power" option is set in an off-grid system, the EVCS regulates the charging power accordingly up to the point where charging is st…
We've just launched a new solar forecast feature for VRM.
This feature combines a model of a sites solar production potential with irradiance forecasting data from Solcasts global fleet of weather satellites.
To use this, make sure you fulfil all the requirements:
- Your installation has a…
Quite an announcement, today we are launching a new member of our GX product family. The Ekrano GX is an all-in-one monitoring device, with a built-in 7 inch touchscreen display and extensive connectivity on the rear.
The Ekrano GX is offering similar power and connectivity as the Cerbo GX, b…
A new version of the VictronConnect App is now available, version v5.91.
It has a few new firmware versions as well The changes in this new version are:
1) The recent firmware version v1.12 for the Multi RS and Inverter RS, which adds parallel operation for the Inverter RS, is …
The 48V MultiPlus-II 8kVA & 10kVA are now certified for the German VDE-AR-N 4105:2018-11.
The certificates are available in the download section of the MultiPlus-II.
Direct download links here: