The new firmware (2663)503 increases the charge power for all models 12V, 24V & 48V MultiPlus 1600VA.
A firmware related reduction in the past has been fixed with this update. It means the MultiPlus 1600VA can now continuously charge faster than before.
The new firmware is already available …
For the EVCS & EVCS NS the new firmware 1.25 is now released.
Many new features were added:
● 'Battery powered' or 'Off-grid' auto mode algorithm. This is used by default
● Grid failing processing (it will enable charging if it was active before failing)
● Pairing between EVCS …
The new firmware v1.8.3 for the Energy meter EM24 Ethernet fixes a problem that those meters in some installations sometimes stop working.
They then require a power cycle, which is rather difficult, especially for an energy meter that is wired in series with the rest of the house/applications.
…
We released VictronConnect v5.83 to all app stores. It brings various fixes and mostly updates the firmware included in the app.
We added:
-
Ukrainian translation
SmartShunt firmware v4.14:
- Fix for lost firmware. In rare situations the SmartShunt would require a firmware …
Today a new version of Venus OS was released, v2.94. It has two fixes:
- DVCC: Fix bug where data from a CAN-bus connected battery could get stuck/freeze until GX devices was rebooted. We've seen this happen in a handful of support cases; and it related to certain timing …
The system will read the AC input type that is selected on the GX device, and/or in VictronConnect (as for the Multi RS), and then tell you where that AC input energy went;
- direct to loads
- charging the battery
- total kWh
This VRM feature …
The Carlo Gavazzi 3-phase EM24 RS485 is now replaced by the EM540 RS485.
EM540 Victron Energy Part N° is REL200100100
The new EM540 meter will be in stock as the EM24 was.
For the installers there is no difference as the communication to our GX devices is …
New: plastic covers for the GX Touch 50 and 70 display accessories.
These covers protect the GX Touch display from water, dust as well as UV light.
Part numbers:
- BPP900462050 GX Touch 50 Protection Cover
- BPP900462070 GX Touch 70 Protection Cover
More …
- Update included firmware from v501 …
Yesterday we released VE.Bus firmware v502. A small update with two changes:
- Prepare for improved generator start/stop when controlled via a GX Device and having the generator connected to AC input 1. For further details, see this recent post about VE.Bus firmware version v501.
This new version of Venus OS further builds onto release v2.90. And contains various fixes:
- Fix a problem where Remote Console wouldn't work, and required a factory reset to be repaired. Any systems now having the issues will be fixed automatically once updated to v2.93.
- Add the …
Recently a couple of new interesting features have been added to the MPPT sizing calculator.
When calculating (bottom right in the picture) you can now:
- Filter the results on MPPT features like 'Bluetooth', 'VE.Can', integrated 'inverter' or 'AC charger'.
- Connection type 'terminals' or 'MC4'
- …