We are pleased to announce the release of EVCS Firmware 1.29. Here are the new features and improvements:
New Features:
- Remote access to the EVCS webpage allows all settings to be configured remotely.
- Added a "Reboot" button to the web interface
- Introduced "Allow low excess solar power for au…
We are pleased to announce the release of firmware version 3.16 for SmartSolar Charger models equipped with a VE.Can port. This update addresses a critical bug in the VE.Can synchronised charging mechanism.
Bug Fix Details:
A critical bug introduced in firmware version 3.15 (released in January 2…
We are excited to announce the launch of the GX 50 and GX 70 Flush Mount Versions! These new models are designed to be mounted flush on the wall, providing a sleek and modern look for any installation.
Key Features:
1. Modern Aesthetic:
Achieve a clean, …
Released today, Venus OS v3.40 adds various features and further increases the stability and versatility of our range of GX monitoring products.
Parallel redundant Lynx Smart BMS
The new parallel redundancy feature for the Lynx Smart BMS and Lynx Smart BMS NG series allows multiple Lynx BMSes in …
Officially released per today, Venus OS Large v3.34 updates its Signal K server version to the latest available release.
Note that the latest normal Venus OS version remains at v3.33, announced here.
Changes:
Signal K Server v2.7.1 -> v2.8.3:
- Improve App store user friendliness
- Va…
We are excited to announce the new External Transfer Switch feature for MultiPlus-II.
This feature brings a significant improvement to the versatility, cost as well as reliability of especially larger systems, ie 60kVA and upwards.
Advantages:
- Reduce installation time and costs: S…
Today we are releasing Venus OS v3.33. Changes:
Generator management
-
Improvements to the "generator auto-start is off" alarm. That alarm is there to prevent accidental system outages by warning when the auto-start functionality has been forgotten to be re-enabled. And for a digitally connecte…
Today we are releasing Venus OS v3.32. Changes:
General
- Fix notifications not being shown as acknowledged in the user interface.
- RV-C protocol: Fix bug that causes crashes and restarts + RV-C Out Tank feature.
- VRM and VictronConnect connectivity (MQTT): Fix connection to cloud serv…
Release notes for VE.Bus firmware version v510:
- Added gridcodes: Czech, Poland
- Split the combined G98/G99 gridcode in two separate gridcodes. With G98 being limited to 16A.
- Enabled the appendix M. gridcodes of AS/NZS4777 for standard Multis/Quattros (installation requires external Island …
How to install:
This firmware update is available now as a man…
Solar Charge Controller firmware v1.64 contains a few model specific changes:
- SmartSolar 75/10 and 75/15: fix stability issue that could cause it to freeze during shutdown and startup, only continuing after a power cycle. Applies only to HQ2235 and later.
- SmartSolar 100/20: fix stability issue …
- Improved Error 11 detection reliability on Quattro-II models, especially in areas with frequent load-shedding and/or other grid failures.
- Various internal changes in the code, which is why its renum…